ID # 31054366

2024 John Deere W36R

Videos
Call for Price
Overview
  • 36-inch (91-cm) floating mower deck
  • Powerful 15.5 hp (11.6 kW) V-twin engine
  • Self-propelled hydrostatic drive system
  • Easy-to-use controls for operator comfort and convenience
Specifications
Model
W36R
Category Name
MOWERS
Year
2024
Sale Type
New
Manufacturer
John Deere
features

2024 John Deere W36R 2024 John Deere W36R V-twin engine delivers smooth operation and plenty of power

Powered by an air-cooled, vertical-shaft engine:

  • 15.5 hp (11.6 kW) FX481V - W36R 
  • 19.0 hp (14.2 kW) FX600V - W48R, W52R
  • 23.5 hp (17.5 kW) FX730V - W61R
  • 36.8 cu in. (603 cc) - W36R, W48R, W52R
  • 44.3 cu in. (726 cc) - W61R
  • Electric start with a large 300 cold-cranking amp (CCA) battery for fast, convenient starts
  • V-twin design for smooth operation and fast starts

               Consistently strong torque at low- or high-speed operation

  • Aluminum engine block with cast-iron cylinder liners

               Effectively dissipates heat

  • Lightweight and strong construction
  • Overhead valve design
  • More horsepower and torque per cubic inch of displacement
    • Better fuel efficiency
    • Less oil consumption
    • Cooler operating temperature
  • Full-pressure lubrication with full-flow filter
    • Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
    • Helps keep oil clean for increased engine life

2024 John Deere W36R 2024 John Deere W36R A fabricated floating mower deck delivers high-quality cut

John Deere commercial mower decks have always demonstrated quality, performance, and durability. Each commercial walk-behind mower is equipped with a high-quality fabricated mower deck:

  • 10-gauge, 0.135-in. (3.42-mm) fabricated steel deck top with added 10-gauge, 0.135-in. (3.42-mm) spindle mounting plate
  • 7-gauge, 0.19-in. (4.8-mm) side skirts with reinforcement bar

The fabricated, floating mower deck delivers an extremely high-quality cut in diverse conditions:

  • Floating suspension enables the best possible cut
  • Reinforced front lower edge gives strength and durability
  • Deep-deck design for superior capacity

2024 John Deere W36R Optional mulching attachment for extra convenience

An optional mulching attachment and special mulching blades are available:

  • The high-performance mulching attachment includes formed steel baffles to control the material for superior performance.
  • Special mulching blades can also be used when side discharging, though overall cutting performance may be slightly less than with the standard blades.
  • The mulching attachment allows for conversion of the mower deck so it can be used to perform the mulching function (grass or leaves).
OPERATING TIPS WHEN MULCHING:
  • Mow when grass is dry.
  • Observe the one-third rule.
    • No more than one-third of the grass blade should be cut off at one time. This allows more efficient mulching and will promote the continued good health of the grass.
    • If the desired cut height cannot be achieved by cutting off one-third, or there is clumping of the clippings, it may be required to cut higher, wait a day, then lower the mower and make a second pass.
  • Mow at proper intervals, approximately every four to five days.
  • Always mow with sharp blades.
  • Adjust ground speed to allow the mower deck to process the clippings effectively.

2024 John Deere W36R 2024 John Deere W36R Convenient controls for operator comfort and productivity

All of the controls are located within comfortable reach of the operator. Simplified operation of each control offers superior convenience, productivity, and safety:

  • Color-coded and clearly marked levers, switches, and buttons enable simplified operation.
  • Bilingual decals in English and Spanish are provided.
  • The operator presence system requires that one of the bails must be depressed to operate the unit; the machine must be in neutral and the power take-off (PTO) must be disengaged to start.
    • Operator presence control levers are recessed into control handle when engaged, provides a smooth contour and comfortable handle to hold during operation.
  • Separate choke and throttle – This takes the guesswork out of choke operation, with less chance of fowling the spark plugs.
  • Electric PTO clutch on the engine powers the mower deck. The PTO switch on the dash is easy to see and use.

2024 John Deere W36R 2024 John Deere W36R Compact design with a strong, welded frame for superior durability

From the operator's station to the mower deck, John Deere walk-behind mowers have a compact and functional design:

  • Caster wheels are set in as close to the mower as possible.
    • Shortest overall machine length to maximize maneuverability and minimize space needed on a trailer
  • The compact design of John Deere commercial walk-behind mowers allows access to operate in tight areas where larger ride-on machines cannot fit. Often, this means the area can be mowed with a walk-behind mower so it is not necessary to switch to another mower, which helps reduce the time on site.
  • With the compact design of John Deere commercial walk-behind mowers, less space is required on a truck or trailer, possibly freeing up space for an extra mower, resulting in less time on property, saving both time and money.

2024 John Deere W36R 2024 John Deere W36R Self-propelled drive system gives infinite mowing speeds

W36M and W48M Mowers are equipped with an infinitely variable hydrostatic drive system with reverse, which does the following:

  • Provides infinite ground-speed adjustments from 0 mph to 6.5 mph (0 km/h to 10.5 km/h) to meet the mowing application
  • Enables a smooth transition from one speed to another 
  • Positive reverse speed of 3 mph (4.8 km/h), enabling the operator to back out of tight mowing areas and increase productivity
  • Steel guards protect the transmissions from obstructions
  • Convenient tracking adjustment knob allows on-the-go adjustment

2024 John Deere W36R 2024 John Deere W36R Thoughtful designs promote safe operation

Safety features are designed into M and R Series commercial walk-behind mowers:

  • Before the engine will start, the transmission speed control lever must be locked in neutral, the parking brake set, the power take-off (PTO) disengaged, and the key switch turned to the on position.
  • Left- and right-hand speed/direction control levers are locked in neutral by spring-loaded knobs on the end of control handles.
    • The knob has a finger lever, making it easy to move to the locked position while holding the control lever in the neutral position.
    • The locking knob is spring loaded for easy release of the control levers.
  • Separate choke and throttle – this takes the guesswork out of choke operation, and there is less chance of fouling the spark plugs.
  • Color-coded and clearly marked switches and buttons are easy to find.

2024 John Deere W36R 2024 John Deere W36R Optional grass catcher makes collecting grass and leaves easy

The grass catcher is designed to work with 36-in. (91-cm), 48-in. (122-cm), and 52-in. (132-cm) Mower Decks on John Deere Commercial Walk-Behind Mowers:

  • Large, 4.4-cu ft (125-L) capacity for less stops to empty catcher.
  • No mower faceplate is needed. The catcher connects directly to standard mower deck features.
  • Stainless steel and aluminum construction is both durable for long life and lightweight for easy handing.
  • Convenient sliding door latch enables easy emptying.
  • Two large grab handles provide for easy handling.
  • Catcher weighs about 30 lb (13.6 kg) empty.
key specs
Engine manufacturer/model FX481V
Engine power At 3600 rpm 15.5 hp*
11.6 kW
Fuel tank capacity 5.4 U.S. gal.
20.4 L
Mower deck Size 36 in.
91.4 cm
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Transmission Two Hydro-Gear™, 0.73-cu in. (10-cc) hydraulic pumps and Danfoss 12 cu-in. (197-cc) wheel motors and ergonomic handles with spring loaded neutral lock
Speed range Forward, 0-7.5 mph
0-12.1 km/h
Reverse, 0-3 mph
0-4.8 mph
Drive wheels 18x6.5-8
Caster wheels 9x3.5-4 semi-pneumatic
Warranty 36 months or 1200 hours, whichever comes first: First 24 months, no hour limitation
engine
Manufacturer/model FX481V
Power At 3600 rpm 15.5 hp*
11.6 kW
Displacement 36.8 cu in.
603 cc
Cylinders V-twin
Operating speed 3,600 rpm
Ignition/Starter Electronic/electric start
Valving Overhead valves
Oil filter Standard
Lubrication Full pressure
Governor Flyweight all speed governor
Hour meter Standard, digital
Cooling system Air cooled
Air cleaner Heavy-duty air cleaner
Muffler Low tone
fuel system
Fuel type Gasoline
Fuel tank capacity 5.4 U.S. gal.
20.4 L
Fuel pump Vacuum-operated diaphragm
Fuel delivery system Carburetor
Fuel tank switch/Shut off valve No
Fuel pickup Top draw
electrical system
Ignition Electronic spark
Hourmeter Standard, digital
Operator presence starting system PTO off, park brake engaged, speed lever in neutral
drivetrain
Transmission Two Hydro-Gear ZT-2800 unitized pump and wheel motor transmissions and ergonomic handles with spring-loaded neutral lock
Shift mechanism Ergonomic handles with spring-loaded neutral lock
tires
Drive wheels 18x6.5-8
Caster wheels 9x3.5-4 semi-pneumatic
travel speed
Thickness 0.25 in.
0.64 cm
Blade tip speed Approximately 18,000 fpm
5486 m/min
Number Two
brakes
Type Dynamic braking with hand controls, hand lever to set parking brake
dimensions
Height 44.8 in.
114 cm
Length with deck 76.4 in.
194 cm
Width Deflector down - 50 in.
127 cm
Deflector up for storage - 40 in.
102 cm
Weight 655 lb
297 kg
mower deck
Size Material
10-gauge, 0.14-in. (3.42-mm) fabricated steel deck top with added 10-gauge, 0.14-in. (3.42-mm) spindle mounting plate, 7-gauge, 0.19-in. (4.8-mm) side skirts with reinforcement bar
Blades
Two high-lift
Length - 18 in.
45.7 cm
Thickness - 0.25 in.
0.64 cm
Blade drive
V-belt
Blade tip speed
Approximately 18,000 fpm
5,486 m/min
Cutting height
1.5-4.5 in.
3.8-11.4 cm
36 in.
91.4 cm
buyer's notes
Warranty 36 months or 1500 hours, whichever comes first, no hour limitation for the first 24 months.
additional information
Date collected 11-July-2022
literatures
Name Link
View Product Brochure Download
Export to Excel Download
Videos Documents
My Cart - items