Salford AerWay AWM SERIES FOR HAY & PASTURE

Features:

• Frame – Three standard width configurations are available: 6.25 ft., 7.5 ft. and 10 ft. The frame of the AerWay is a structural steel weldment with integral weight trays. The AerWay is available as either a 3-Point (AWM3) or a Pull Type (AWMP) configuration.

• Rollers – The rollers use four tines per row at 7.5” spacing. Each roller shaft is supported by two 50mm (2”) Pillow Block bearings.

• Tillage – Rollers can be adjusted to 0°, 2.5° and 5° settings to vary the extent of aeration or cultivation.

• AWMP Hydraulics – 3” bore x 12” stroke double acting cylinder with manual lockout.

• AWMP Wheels – 9.5” X 15” – 8 ply ribbed agricultural tire mounted to six bolt hub. Quantity: Two supplied.

Benefits:

• Great Value, Saves Resources – One implement that can do many jobs. Get the maximum benefit out of your inputs and achieve a better root system that results in higher yields.

• Use All Season – Aerate, warm, and loosen soils in the spring, then relieve compaction or renovate after each hay cutting during the rest of the season.

• Very Dependable – Designed and built to withstand demanding field conditions and provide years of reliable service.

• Increased Yields – Better quality grass or hay results in more weight gain and healthier animals.

Options:

• Pull-type Wheel Kits – Designed to convert your machine into a “trail” unit with tires rearward. Eliminates stress on your 3-point lift arms by transferring weight to the drawbar.

• Ballast Blocks – For hard compacted ground conditions, ballast blocks are available in 550 and 750-lb. weights.

• Lighting Kit – Includes two lights and two universal mounting brackets and harnesses.

• Pull-type Harrow Caddys – Swivel pull-type caddys are available in widths of 17’ to 26’.

• Drag Chain Harrows – 5/8” diameter; drag harrows are available from 5’ wide to 26’ wide x 84” deep.